Search
en-USde-DEnl-NL
Search
Thursday, March 28, 2024
PagesLogbookMagazine

Enamel magazine

Magazine with articles and news publications about enameling

Submitted art pieces

Submitted art pieces

Submitted art pieces

By Adele Bouwman

Author: WebMaster/Monday, December 30, 2013/Categories: Enameling

Rate this article:
No rating

Apple
Applied a counter enamel layer first.
After this I sifted a layer P228 Cherry red
then, on the right side, I sifted some P305 Sap green.
Everything is applied in a thick layer.
On the border of red and green I scrambled the colors with the aid of a wipe out stick.
The stem is sifted with P211 Oak brown.
The art apple is burned at 780 degrees.
At the backside I mounted a clip with some glue.

For this I took a piece of 5x5 cm copper and applied counter enamel at the backside.
It bended a little, however I liked this, because I wanted to make a broche of it.
I have burned this at 780 degrees.
Then I applied some transparent colors.
PT481 Basalt gray,  PT482 Sap green,  PT222 Night blue,  PT480 Old gold and PT147 Wine red.
I burned this at 800 degrees and mounted a broche clip at the backside.

This hand is done with wet pack technique.
The colors I used are P217 Black and P148 Corral red.
I have applied the colors with the aid of a flat wooden stick.
First I have applied counter enamel at the backside, and then I applied the colors at the front.
I have burned this hand twice.
The first time I applied to less enamel.
The second time I applied a ticker layer of enamel.
The temperature of the kiln was 780 degrees.
I make often jewelry with beads and Swarovski glue stones.
On this Hand I have glued 6 Orange Swarovski stones en at the backside a broche clip.

I have applied at the backside of this ring (EP0449) and pendant (K0009) counter enamel.
Then I applied only Dark turquoise P088.
I have used the sift technique and applied at the borders some more enamel powder.
After this I have burned everything at 780 degrees.
Then I applied some Soft gray P303 over de top.
After this, on the top and sides some Cobalt blue P263 and Purple P226.
As last some little black glass threads.
Then I burned this at 780 degrees.
I mounted the square into the ring with some glue.
The sides of the pendant are sanded with sandpaper 600 and sandpaper 1200.
As last I treated the sides of the pendant with silver plater.

Print

Number of views (37525)/Comments (0)

WebMaster
WebMaster

WebMaster

Webmaster of the watermanshop enamel supplies webshop

Other posts by WebMaster
Contact author
Please login or register to post comments.

Contact author

x
Ton Hermes, Schagen, Niederlande - Tel:(+31) 6 41 70 16 42 Terms Of Use Privacy Statement
Back To Top