Search
en-USde-DEnl-NL
Search
Friday, March 29, 2024
PagesLogbookMagazine

Enamel magazine

Magazine with articles and news publications about enameling

Traffic light

Traffic light

Traffic light

A turtle wit a traffic light

Author: WebMaster/Thursday, January 19, 2012/Categories: Worksheets

Rate this article:
5.0

Traffic light 1

Drill a hole in one of the legs of the turtle
Clean the copper with the sanding block on both sides
Close the 3 copper rings with the pliers so that there is no gap.

Traffic light 2

Bend the turtle with your hands as you see on the picture.
Or you can use the side of a table to bend the turtle.
Bend it so far that you get a nice turtle shape.
Use the pliers to bend the legs of the turtle so that it is standing nice.

Traffic light 3

Degrease the copper.
Sift on the belly counter enamel and burn it in the kiln.
Sand the backside of the turtle nice and clean again.
Traffic light 4
Sift enamel powder on the turtle.
Burn the turtle in the kiln ;-)
Sift enamel powder on the back again.
Arrange the 3 copper rings on the back of the turtle in the shape of a traffic light.
Put some grains of jewel enamel in the ring.
(You can sort the jewels on color if you like.)
TIP:
When you lay some fine silver foil on the bottom of 1 of the rings, then this light will be on!
Traffic light 5

Burn the turtle in the kiln again.
Clean the copper rings with a copper brush shiny.
Mount the last ring.
And you traffic light is ready!

 

Print

Number of views (30920)/Comments (0)

WebMaster
WebMaster

WebMaster

Webmaster of the watermanshop enamel supplies webshop

Other posts by WebMaster
Contact author

Documents to download

Please login or register to post comments.

Contact author

x
Ton Hermes, Schagen, Netherlands - Phone (+31) 6 41 70 16 42 Terms Of Use Privacy Statement
Back To Top