Useable for Hot and Cold enamel.
EFCO 110 Enamel kiln
The kiln will be delivered with:
- Cable and plugs
- Free download of the Enamel A,B,C.
- 10% discount on a workshop enameling (Basic or Advanced)
General data
EFCO 110 - the all around heatable muffle kiln is the ideal introduction kiln.
Fast heating as well as a big sight window are other features, wich jewellery desinger appreciate.
Techniques like silver clay, porcelain painting, pottery and many more can be done.
Firing capacity approx. 900° celsius after 30 minutes.
All the enamel pieces showed on this site by me are made in this type of kiln.
Technical data
Maximum : temperature 950 ° Celcius
Watt : 230 V / 900W. 6A
Overall size : HxWxD: 210x200x250 mm
Firing chamber : HxWxD 70x120x130 mm
Net weight : ca 5.8 kgA
Appropiate controls
There are several types of controls available for this kiln.
EFCO Temperture regulator
The EFCO Energize Controller regulates the current supply automatically through rhythmic activation and deactivation.
When the controller is switched on, the control lights up and then goes off according to the rhythm set.
By adding this appliance, you can achieve almost every constant temperature in every EFCO kiln so it is possible to stove glass and ceramic painting.
The temperature controller is strongly recommended for every kiln since only then can the many functional possibilities of the enamel kilns be used to the full and the service life of the heating spirals is increased considerably.
Connect the temperature regulating device:
1. Plug the connector from the kiln into the socket of the temperature regulating device.
2. Plug the connetor from the temperature regulating device into the wall socket.
Technical data.
230 V - 16 A
Load up to 3500 Watt.
EFCO Temperature measuring device
This temperature measuring instrument can be connected to all EFCO electric kilns and serve to determine the temperature inside the kiln.
The connection of the measuring instruments is very simple.
At the back of the kiln is a connection device, into which the temperature sensors of the measuring instrument is inserted.
Via a thermo element, this instrument transfers a temperature range of 20 degrees celsius to 1200 degrees celsius is clearly marked.
For regulating the desired temperature, we recommend that the EFCO temperature regulator be switched on before the kiln.